DS411J and WD10EADS drives

Discussion about the Western Digital Load Cycle Count. Any form of disrespectful behavior will result in immediate ban. It is at the will of Synology to determine what is disprectful behavior. Refer to Forum policy for further information. This room may be archived at any time at the will of Synology
Forum rules
1) This is a user forum for Synology users to share experience/help out each other: if you need direct assistance from the Synology technical support team, please use the following form:

https://account.synology.com/support/su ... p?lang=enu



2) To avoid putting users' DiskStation at risk, please don't paste links to any patches provided by our Support team as we will systematically remove them. Our Support team will provide the correct patch for your DiskStation model.
johneher
I'm New!
I'm New!
Posts: 2
Joined: Sat Mar 19, 2011 6:00 pm

DS411J and WD10EADS drives

Unread post by johneher » Sat Mar 19, 2011 6:21 pm

Hi,

I am a new user of a DS411j NAS and have two 1TB WD10EADS-00L5B1 drives from a WD world Book II. According to the compatibility list they should work. My question is with the two new recently purchased 1TB WD10EADS-22M2B0 work? They are all 'green",32mb cache SATA drives but are they compatible and if so what do I have to do to make them work? Iam an old engineer from the days of nixi lights and punch cards and this is all a bit overwhelming. Any help is greatly appreciated.

Post Reply

Return to “Western Digital LLC Discussion Room”