DS508/RS-408 Bootstrap released.

All discussions/development regarding the Freescale MPC8543 Chip can be placed here.
Forum rules
Synology Community is the new platform for the enthusiasts' interaction, and it will soon be available to replace the Forum.
mdamen
I'm New!
I'm New!
Posts: 5
Joined: Tue Dec 18, 2007 12:53 am

DS508/RS-408 Bootstrap released.

Unread post by mdamen » Sun Jun 22, 2008 12:38 pm

I've released a bootstrap for these Synology models.
Please view the following page:
http://www.maartendamen.com/node/27

Currently it has a small package list (only those packages required to run SABnzbd) however I am glad to compile a package for you. Just request it here.

andreask2
Novice
Novice
Posts: 59
Joined: Tue Mar 13, 2007 10:58 am

Re: DS508/RS-408 Bootstrap released.

Unread post by andreask2 » Tue Jun 24, 2008 10:03 am

What about publishing the toolchain here: http://trac.nslu2-linux.org/optware/bro ... atform.txt

see: http://www.synology.com/enu/forum/viewt ... 777#p34777

This way more than 1000 packages get compiled and updated automatically...

richardms
I'm New!
I'm New!
Posts: 3
Joined: Fri Jun 20, 2008 5:55 pm

Re: DS508/RS-408 Bootstrap released.

Unread post by richardms » Wed Jun 25, 2008 12:23 pm

Thanks Maarten, especially for compiling Python - it was literally next on my list.

However, I did have some problems with the bootstrap. After installing many programs failed to run given Segmentation Faults (including wget meaning that 'ipkg update' also failed).

After a bit of investigation it seems that the problem is with one of the libraries installed into /opt/lib, and tracking it down I think it is the pthread library. Since the DS508 firmware comes with a compiled pthread library, I found that I could simply delete/move the pthread library out of /opt/lib (as root):

Code: Select all

> cd /opt/lib
> mkdir /volume1/@tmp/pthread
> mv libpthread* /volume1/@tmp/pthread
As I'm new to Synology machines, I need to do some reading about ipkgs etc, but once I have some do we have somewhere we can share them? Or, do you think it best we work through the NSLU2 project?

Regards,
Richard

maestro1
Trainee
Trainee
Posts: 12
Joined: Fri Nov 03, 2006 7:00 am

Re: DS508/RS-408 Bootstrap released.

Unread post by maestro1 » Sat Jul 12, 2008 6:47 pm

hello
first:
i have install

sh dsx08-bootstrap_1.0.xsh

when i use ipkg update

downloadin http://www.maartendamen.com/synoware/x08/packages
segmentation fault (core dumped)
downloading http://ipkg.nslu2-linux.org/feeds/optwa ... ackages.gz
segmentation fault (core dumped)
an error ecorred return value: 2.
collectet errors:
ipkg_download: error: command failt with return value 139: 'wget --passive-ftp - q - P /opt/ipkg- l7CH4g http://www.maartendamen.com/synoware/x08/packages'
ipkg_download: error: command failt with return value 139: 'wget --passive-ftp - q - P /opt/ipkg- l7CH4g http://ipkg.nslu2-linux.org/feeds/optwa ... ackages.gz


thats all, what i can do? whats wrong, please help

thank you
Current Station
Synology DS1515+ mit 6 GB Arbeitsspeicher
Firmware DSM 5.2-5644 Update 3
5x 3TB 24x7 Seagate ST3000NM0033-9ZM178 - Raid 5

Farmer Stations:
Synology CS406 + 4x 500GB HDD - Raid 5
Synology CS407 + 4x 1TB HDD - Raid 5
Synology DS508 + 5x 1,5TB HDD - Raid 5
Synology DS1512+ 5x 2TB 24x7 Seagate ST2000DM001 - Raid 5

andreask2
Novice
Novice
Posts: 59
Joined: Tue Mar 13, 2007 10:58 am

Re: DS508/RS-408 Bootstrap released.

Unread post by andreask2 » Sat Jul 12, 2008 8:30 pm


uwekronberg
I'm New!
I'm New!
Posts: 6
Joined: Tue Jul 15, 2008 8:16 am

Re: DS508/RS-408 Bootstrap released.

Unread post by uwekronberg » Thu Jul 17, 2008 4:41 pm

I would like to remove the bootstrap compiled by Maarten Damen. But i have no idea how to manage this.
Any ideas?

Thanks for replies

Fritze
Beginner
Beginner
Posts: 24
Joined: Mon Jul 21, 2008 9:13 am

Re: DS508/RS-408 Bootstrap released.

Unread post by Fritze » Fri Jul 25, 2008 1:38 pm

Hi Marten

Good work! This might actually help me alleviate a hibernation problem. Only thing is: I need hdparm. Any chance you could make that available? Smartmontools would be nice to have too.

TIA!
Synology DS414 - SHR
4 x 4TB WD RED NAS hard drives

Synology DS411J - SHR
2 x 2TB + 2 x 1.5TB Seagate hard drives

atrais
I'm New!
I'm New!
Posts: 3
Joined: Mon Jul 28, 2008 1:00 pm

Re: DS508/RS-408 Bootstrap released.

Unread post by atrais » Thu Jul 31, 2008 2:43 pm

Hi, when I run ipkg install perl I get :

Nothing to be done
An error ocurred, return value: 4.
Collected errors:
Cannot find package perl.
Check the spelling or perhaps run 'ipkg update'

I have this in ipkg.config :

#option verbose-wget
#
# Proxy support:
#
#option http_proxy http://localhost:5865
#option ftp_proxy http://proxy.tld:3128
#option proxy_username <username>
#option proxy_password <password>
src r2004roellig http://www.familie-roellig.de/public/nslu2/unslung
src unstable http://ipkg.nslu2-linux.org/feeds/unslung/unstable

Its a rs-408 box.

gendem
I'm New!
I'm New!
Posts: 9
Joined: Fri Aug 01, 2008 11:06 pm

Re: DS508/RS-408 Bootstrap released.

Unread post by gendem » Fri Aug 01, 2008 11:09 pm

Can you make svn/subversion?

...Mike

gendem
I'm New!
I'm New!
Posts: 9
Joined: Fri Aug 01, 2008 11:06 pm

Re: DS508/RS-408 Bootstrap released.

Unread post by gendem » Fri Aug 01, 2008 11:33 pm

atrais wrote:Hi, when I run ipkg install perl I get :

Nothing to be done
An error ocurred, return value: 4.
Collected errors:
Cannot find package perl.
Check the spelling or perhaps run 'ipkg update'

I have this in ipkg.config :

#option verbose-wget
#
# Proxy support:
#
#option http_proxy http://localhost:5865
#option ftp_proxy http://proxy.tld:3128
#option proxy_username <username>
#option proxy_password <password>
src r2004roellig http://www.familie-roellig.de/public/nslu2/unslung
src unstable http://ipkg.nslu2-linux.org/feeds/unslung/unstable

Its a rs-408 box.
The only reference to perl I see in either of those repositories is for an ARM build, and the RS408 is a PPC is it not?

...Mike

bzhou
Knowledgeable
Knowledgeable
Posts: 344
Joined: Sat Jan 12, 2008 1:57 am

Re: DS508/RS-408 Bootstrap released.

Unread post by bzhou » Sat Aug 02, 2008 3:57 am

atrais wrote:Hi, when I run ipkg install perl I get :

src r2004roellig http://www.familie-roellig.de/public/nslu2/unslung
src unstable http://ipkg.nslu2-linux.org/feeds/unslung/unstable

Its a rs-408 box.
Where are these two lines coming from?
The feed with the most packages for MPC8543 CPU is at:
http://ipkg.nslu2-linux.org/feeds/optwa ... /unstable/

nanuit
I'm New!
I'm New!
Posts: 9
Joined: Mon Aug 11, 2008 7:54 pm

Re: DS508/RS-408 Bootstrap released.

Unread post by nanuit » Sun Nov 16, 2008 12:09 am

maestro1 wrote:hello
first:
i have install

sh dsx08-bootstrap_1.0.xsh

when i use ipkg update

downloadin http://www.maartendamen.com/synoware/x08/packages
segmentation fault (core dumped)
downloading http://ipkg.nslu2-linux.org/feeds/optwa ... ackages.gz
segmentation fault (core dumped)
an error ecorred return value: 2.
collectet errors:
ipkg_download: error: command failt with return value 139: 'wget --passive-ftp - q - P /opt/ipkg- l7CH4g http://www.maartendamen.com/synoware/x08/packages'
ipkg_download: error: command failt with return value 139: 'wget --passive-ftp - q - P /opt/ipkg- l7CH4g http://ipkg.nslu2-linux.org/feeds/optwa ... ackages.gz


thats all, what i can do? whats wrong, please help

thank you
I have the same problem. Is there a solution?

Thx
Synology Model: DS-508
Firmware Version: 2.2-0914

andreask2
Novice
Novice
Posts: 59
Joined: Tue Mar 13, 2007 10:58 am

Re: DS508/RS-408 Bootstrap released.

Unread post by andreask2 » Tue Nov 18, 2008 8:08 pm

Again, I'd try the nslu2-linux version, it's better tested, maintained and supported:

http://www.synology.com/enu/forum/viewt ... =92&t=9176

Post Reply

Return to “Freescale MPC8543 Development Room”