Hyper Backup Target On-line then Off-line

Discussion room for the Hyper Backup package
Forum rules
1) This is a user forum for Synology users to share experience/help out each other: if you need direct assistance from the Synology technical support team, please use the following form:

https://account.synology.com/support/su ... p?lang=enu



2) To avoid putting users' DiskStation at risk, please don't paste links to any patches provided by our Support team as we will systematically remove them. Our Support team will provide the correct patch for your DiskStation model.
goodhew
I'm New!
I'm New!
Posts: 1
Joined: Sun Mar 04, 2018 1:25 am

Hyper Backup Target On-line then Off-line

Unread post by goodhew » Wed Jun 20, 2018 2:05 pm

I have been running Hyper Backup from a Synology NAS DS218+ (source) to a Synology NAS DS218 (destination) successfully for 3 months now. For the past few days Hyper Backup is failing. When I start the backup the Target is On-Line and when I get to the 47% mark the Target goes off-line, the weird thing is that it stops at 47% every single time. Any thoughts on why it starts normally and then fails?

User avatar
akahan
Distinguished
Distinguished
Posts: 892
Joined: Sat Jul 14, 2012 6:52 pm

Re: Hyper Backup Target On-line then Off-line

Unread post by akahan » Wed Jun 20, 2018 3:28 pm

Are you using an ssl connection to the target?

Post Reply

Return to “Hyper Backup”