RT2600AC failover settings how

Topics pertaining to SRM usage, usability and management
Forum rules
1) This is a user forum for Synology users to share experience/help out each other: if you need direct assistance from the Synology technical support team, please use the following form:


2) To avoid putting users' DiskStation at risk, please don't paste links to any patches provided by our Support team as we will systematically remove them. Our Support team will provide the correct patch for your DiskStation model.
I'm New!
I'm New!
Posts: 1
Joined: Wed May 03, 2017 1:24 pm

RT2600AC failover settings how

Postby nova18 » Wed Jan 03, 2018 3:34 am

Hi all, need some help with this setting.. the router is connected to NBN HFC most of the time. I have been wondering if its possible to set the 4g dongle support as the failover incase the NBN is disconnected..

once i connect the 4g dongle.. the 26000ac automatically switches to the 4g connection.. which i was trying to prevent...
Any ideas? Thanks in advance!
Posts: 815
Joined: Tue Jul 26, 2016 10:47 am

Re: RT2600AC failover settings how

Postby Babylonia » Thu Jan 04, 2018 2:34 pm

Seems you have set the wrong interface priority.
Go to "Network Center" ----> Internet ----> second tab at the top "Smart WAN" ----> button "Interface Priority"
Choose WAN interface for number 1 and 3G/4G for number 2 (you can change by up & down button).

Return to “Installation and Configuration”

Who is online

Users browsing this forum: No registered users and 5 guests