NTFS - 2.2-0914 still read only?

Discussion the beta DSM 2.2-0914 here. Please report all bugs to the Beta Program Manager.
Forum rules
1) This is a user forum for Synology users to share experience/help out each other: if you need direct assistance from the Synology technical support team, please use the following form:

https://account.synology.com/support/su ... p?lang=enu



2) To avoid putting users' DiskStation at risk, please don't paste links to any patches provided by our Support team as we will systematically remove them. Our Support team will provide the correct patch for your DiskStation model.
User avatar
amarryat
Novice
Novice
Posts: 46
Joined: Wed Dec 31, 2008 4:19 pm

NTFS - 2.2-0914 still read only?

Unread post by amarryat » Tue Sep 01, 2009 6:53 pm

From what I have read, if I attach an NTFS drive (via USB) to my DS108J with the beta firmware, I should be able to WRITE to it now as well as read. However I am still unable to write. I would like to use the internal backup with this, but it fails as it cannot write to my NTFS drive. This is a WDC 1TB Green drive in a Rosewill case, and it works fine as EXT3 and FAT32. Is there something else I need to do to get this to work?

Edit - in the privileges setup, there is no "write" selection for this NTFS drive as there was when EXT3 was used.

goetz
Knowledgeable
Knowledgeable
Posts: 336
Joined: Wed Mar 18, 2009 10:05 pm
Location: Berlin, Germany

Re: NTFS - 2.2-0914 still read only?

Unread post by goetz » Tue Sep 01, 2009 8:08 pm

Hi,
(5) Writing data to an NTFS external HDD is not supported on DS109j, DS108j, DS107 and DS107e
Regards Goetz
DS-209+II / DSM 3.1-1742 /2x 2TB Seagate Constellation ES
DS-107+ / DSM 3.1-1613 / Samsung HD103UI
DS-106 / DSM 3.1-1742 (from 108j) / Hitachi HDP72505
eTrayZ / Samsung HD103SI

Locked

Return to “Beta - Disk Station Manager 2.2-0914”