inofficial fw updates on cs 406

Discussion Room for Legacy Disk/Cube/Rack Station from the x01/x06 Series.
User avatar
Vaako
Versed
Versed
Posts: 229
Joined: Thu Jan 11, 2007 12:32 am

Re: inofficial fw updates on cs 406

Postby Vaako » Mon Jan 12, 2015 2:39 pm

Where can we download this v1637 build for the CS406e?
Regards,
Vaako

USB Station 2 with DSM 3.2-1979 (altenative firmware) + (IPKG)
DS101g+ with DS107 DSM 3.1-1636 firmware
DC406e with DSM 3.1-1635 (thanks to Alfredo)
DS1511+ 2Gb RAM with DSM 6.1-15047 Update 2
DS1515+ 8Gb RAM with DSM 6.1-15047 Update 2 + 2x DX510
filipe.nunes
I'm New!
I'm New!
Posts: 1
Joined: Wed Jan 14, 2015 3:11 pm

Re: firmware 0803 on cs 406

Postby filipe.nunes » Wed Jan 14, 2015 3:20 pm

Hi Alfredo,

I have this model RS-406.

I'm trying to update with the files below. I'm not succeeding But it gives an error saying that the file is invalid.

I have to change the model name to make it work? or do a few extra steps?

Best Regards,
Filipe Nunes

Alfredo wrote:CS406 DSM 2.1 0844
http://www.janara.be/stuff/syno/synolog ... 6_0844.pat
MD5 - 579007d7c12914cd7e8d13b2844faf27

CS406 DSM 2.2 0959
http://www.janara.be/stuff/syno/synolog ... 6_0959.pat
MD5 - 4a48bf05fe0c92afec036181fe20a474

CS406e DSM 2.2 0959
http://www.janara.be/stuff/syno/synolog ... e_0959.pat
MD5 - b9d386cae816ea5073442c1ec8914ea3

CS406 DSM 2.3 1157 (upgrade from DSM 2.1 or higher only)
http://www.janara.be/stuff/syno/synolog ... 6_1157.pat
MD5 - 443c70060829ccd637435b97410a1382

CS406e DSM 2.3 1157 (upgrade from DSM 2.1 or higher only)
http://www.janara.be/stuff/syno/synolog ... e_1157.pat
MD5 - b19f8fae60ba11ceafb098f454f1947d

CS406 DSM 3.1 1635 (upgrade from DSM 2.1 or higher only)
http://www.janara.be/stuff/syno/DSM_CS406_1635.pat
MD5 - 47433e3ebf67087c16c29755da5a0ece

CS406e DSM 3.1 1635 (upgrade from DSM 2.1 or higher only)
http://www.janara.be/stuff/syno/DSM_CS406e_1635.pat
MD5 - 797656a1af0256a7b53ebb9c5a0ca636

The releases below are considered to be experimental.

CS406 DSM 3.2 1955 (upgrade from DSM 2.1 or higher only)
http://www.janara.be/stuff/syno/DSM_CS406_1955.pat
MD5 - 93e3cff5ed7aad51fbd7337db4c265c5

Use at your own risk!
User avatar
Vaako
Versed
Versed
Posts: 229
Joined: Thu Jan 11, 2007 12:32 am

Re: inofficial fw updates on cs 406

Postby Vaako » Sun Jan 25, 2015 7:29 pm

Hi Alfredo,

Where can we download this v1637 build for the CS406e?

Thanks!
Regards,
Vaako

USB Station 2 with DSM 3.2-1979 (altenative firmware) + (IPKG)
DS101g+ with DS107 DSM 3.1-1636 firmware
DC406e with DSM 3.1-1635 (thanks to Alfredo)
DS1511+ 2Gb RAM with DSM 6.1-15047 Update 2
DS1515+ 8Gb RAM with DSM 6.1-15047 Update 2 + 2x DX510
edmond
Versed
Versed
Posts: 282
Joined: Sat Jan 06, 2007 10:10 am

Re: inofficial fw updates on cs 406

Postby edmond » Wed Apr 29, 2015 4:21 pm

Still nothing from alfredo
User avatar
HarryPotter
Honorary Moderator
Honorary Moderator
Posts: 18880
Joined: Mon Oct 23, 2006 12:48 pm
Location: Switzerland

Re: inofficial fw updates on cs 406

Postby HarryPotter » Wed Apr 29, 2015 5:47 pm

edmond wrote:Still nothing from alfredo

His last login was from June 2014, so I guess he isnt interested anymore :(
*Please do not Private Message me for support questions; leave it on the forum so all members can learn. Thanks!*

DS718+ / DSM 6.1.3-15152-7 / ST4000VN000-2AH166 / 16 GB RAM
DS713+ / DSM 6.1.3-15152-7 / HD501LJ + HD502IJ (RAID0)
DS415+ / DSM 6.1.3-15152-7

2 Squeezebox 3 + Boom

APC Smart UPS SUA750i
Alfredo
Versed
Versed
Posts: 276
Joined: Mon Jan 26, 2009 5:12 pm

Re: inofficial fw updates on cs 406

Postby Alfredo » Wed Sep 09, 2015 5:22 pm

I will no longer be creating any new builds. The x06 series are almost 10 years old by now, which makes them horribly outdated. Even the latest patched release for x07 models is insecure and should not be connected to any public networks. My CS406 served me well, but is currently collecting dust 4000 miles away. I have no plans to resurrect it.

Sorry folks. I hope I was able to provide some additional life to your devices, but I no longer have the time nor interest in continuing this. The builds will remain up for the foreseeable future, and if I ever quit my webhost I will do my best to move them some place else.

EDIT - Alright, why the heck not. Last update. It's been a few years and I no longer have my device, but I've created build 1369 for the CS406. I had to fiddle around with build since I'm on a Mac now, but I sent it to Edmond for testing. Not sure if it works, I'll create the RS and 406e builds once confirmed.

EDIT 2 - Doesn't work apparently, will install Linux again and try once more.
CS406 - DSM 2.2 0942 (modified from CS-407e)
User avatar
J@n
Novice
Novice
Posts: 56
Joined: Thu Dec 06, 2007 7:34 pm

Re: inofficial fw updates on cs 406

Postby J@n » Sun Sep 20, 2015 2:27 pm

Hi, been enjoying Alfredo's firmware mod for years now. Sometime ago one of the disks in my CS crashed. I recently replaced the disk. Unfortunately the CS won't boot correctly/fully. I cannot reach the web interface. It is alive (it responds to pings) but that's about it.

I have tried the soft reset (press the reset button until it beeps) and the hard reset (press the reset button until it beeps and within 10 seconds press it again) but to no avail :(

Is there anyway to resurrect the CS or must I consider it "bricked"?

Any help greatly appreciated!

Greetz,

J@n
DS115 - 1 x 6TB - Latest DSM
DS211 - 1 x 4TB + 1 x 3TB - Latest DSM
Tranquil SQA-5H - 5 x 2TB - 64GB SSD - Latest OMV
Homebrew server - 5 x 2TB - Ubuntu 16.04.01 LTS with Webmin
edmond
Versed
Versed
Posts: 282
Joined: Sat Jan 06, 2007 10:10 am

Re: inofficial fw updates on cs 406

Postby edmond » Tue Nov 03, 2015 9:30 am

i do not have any cs406 more, and replaced it for ds414j. I cannot test the firmware from Alfredo. When anyone is willing to test his firmware then contact Alfredo of me. Its on your own risk, and i'm not responsabel for it
mahfughft
I'm New!
I'm New!
Posts: 1
Joined: Mon Feb 22, 2016 7:21 pm

Re: inofficial fw updates on cs 406

Postby mahfughft » Mon Feb 22, 2016 7:30 pm

I like firmware 959 :)
Where can I get? Please let me know.
peteralex
I'm New!
I'm New!
Posts: 1
Joined: Fri Feb 26, 2016 7:29 am

Re: inofficial fw updates on cs 406

Postby peteralex » Fri Feb 26, 2016 7:37 am

I'm the person currently working on this. Things are going a bit slower than I intented due to college and the slow process of reformatting the HDD everytime the NAS locks up. My laptop is the only system that accepts SATA disks, so I have to replace my boot disk and use a Linux Live CD to format the HDD (which takes up a lot of time).

v803 works fine though I don't suppose Synology has any objections if I upload that version for others to use? I'll try to get v844 to work in the mean time.

peter
crashnburn
Experienced
Experienced
Posts: 107
Joined: Thu Aug 07, 2008 7:38 pm

Re: inofficial fw updates on cs 406

Postby crashnburn » Fri Sep 16, 2016 6:48 am

Is there a similar thread of updated unofficial firmware for the CS407
iknowtech
Seasoned
Seasoned
Posts: 579
Joined: Thu Jun 19, 2014 8:11 am

Re: inofficial fw updates on cs 406

Postby iknowtech » Fri Sep 16, 2016 8:23 am

You can find the last available firmware for any Synology Model on the Download page of the Support section of the Synology website.
crashnburn
Experienced
Experienced
Posts: 107
Joined: Thu Aug 07, 2008 7:38 pm

Re: inofficial fw updates on cs 406

Postby crashnburn » Sun Apr 09, 2017 5:18 pm

peteralex wrote:I'm the person currently working on this. Things are going a bit slower than I intented due to college and the slow process of reformatting the HDD everytime the NAS locks up. My laptop is the only system that accepts SATA disks, so I have to replace my boot disk and use a Linux Live CD to format the HDD (which takes up a lot of time).

v803 works fine though I don't suppose Synology has any objections if I upload that version for others to use? I'll try to get v844 to work in the mean time.

peter


Can your FW's work CS407?

Return to “x01/x06/x07 Legacy Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest