optware feed syno-x07 from nslu2-linux.org is available

[bzhou]

Hi

[bzhou]

Hi 2

[bzhou]

with the toolchain from synology for x07 arm devices:

http://trac.nslu2-linux.org/optware/bro ... yno-x07.mk

Right now it already can compile more than 900 ipks.

Developers, please help reducing the BROKEN_PACKAGES:

http://trac.nslu2-linux.org/optware/bro ... yno-x07.mk

Cheers,

-Brian Zhou

[bzhou]

I have seen someone built a bootstrap.xsh for x07 devices, if the change is submitted, I can help add it to optware.

[bzhou]

http://ipkg.nslu2-linux.org/feeds/optwa ... /unstable/

will add to autobuild once someone confirms that ipkg works (I don't have any synology device).

[PosterBoy]

SWEET.

I tried JED and Lynx on a DS-207+ and it worked like charm

Thanks a ton. There are a crapload of packages there. I just picked something to see if it would run

Kent

[pableu]

Whoo Brian, glad to see you here. Thanks for your efforts, I would never have been able to make a toolchain.mk as proper as yours!

This works perfect on my box.

[bzhou]

Whoo Brian, glad to see you here. Thanks for your efforts, I would never have been able to make a toolchain.mk as proper as yours!

This works perfect on my box.

Thanks pableu for your initial work. I just add syno-x07 to the autobuilder. We'll be glad to give you svn write access to optware, please contact rwhitby.

[bzhou]

Can moderator make this post sticky please.

[ncx]

Great! This is the best thing to happen to the Synology ARM devices.

miau and rtorrent are working 100% fine.

[Noname]

I had problems with ether py-twisted or/and py-hellanzb

I get the following error on my DS207+

Traceback (most recent call last):
File "/opt/bin/hellanzb.py", line 14, in ?
from Hellanzb.Core import main
File "/opt/bin/Hellanzb.py", line 14, in ?
from Hellanzb.Core import main
ImportError: No module named Core

And everything went alright while install:

Please edit config (/opt/etc/hellanzb.conf)

Configure your news-servers and optionally change directory prefix. (now is /opt/tmp)

You can start hellanzb by /opt/etc/init.d/S71hellanzb or a reboot.
To monitor progress, you can watch /opt/var/log/hellanzb.log
Or you can install a webinterface, like zussaweb

[ikeke]

Hello,

Xmail (including dependencies) is working great !
Thanks for this great job

edit: openssh (including dependencies) is fine too

[pableu]

I just compiled a bootstrap for the DS-107+/207+/407, i tried and it on a DS107+ and it worked as expected.

With this, you can get optware running on a fresh box. You need to enable telnet or ssh first, and log in.

Do the following to install it:

Code: Select all

wget http://pableu.net/syno-x07-bootstrap_1.0-4_arm.xsh
sh syno-x07-bootstrap_1.0-4_arm.xsh

After that, you can run ipkg update and then ipkg install <package>.

[W-Station]

Hi,

it seems that I got my 207+ in right time because theres now plenty of packages available. Thanks Brian!

I have installed many packages like nano, cksfv and rtorrent. I could shut down my linux pc and just use 207+ if irssi would be working. There's a package available but unfortunately gconv-modules which is dependency is on broken_packages list. Couldn't find log files that would tell what's going wrong in building that package.

[SirX]

I just compiled a bootstrap for the DS-107+/207+/407, i tried and it on a DS107+ and it worked as expected.

With this, you can get optware running on a fresh box. You need to enable telnet or ssh first, and log in.

Do the following to install it:

Code: Select all

wget http://pableu.net/syno-x07-bootstrap_1.0-4_arm.xsh
sh syno-x07-bootstrap_1.0-4_arm.xsh

After that, you can run ipkg update and then ipkg install <package>.

What's the difference between this bootstrap and the one from Maarten Damen?