SynoCommunity is glad to announce its new repo

[Smiggel]

@Smiggel : Did you launch all the update at once ?

Or launched one, then wait the end, launch 2nd ... ?

Not sure if you will need to delete/reinstall, since you might be able to juste "update" the packages again

There is a post in previous page about all the settings import/export

I did them one by one. I updated all the packages through the package center. I can only update one at a time. All worked fine. All packages did run fine.

Hmmm ok. I am not good with telnet, etc. Have a look at it or otherwise have to set all options manually I guess. But I will first try a new install/update of the packages.

[bud77]

Repo is now up

A little script was getting messy

[Smiggel]

Repo is now up

A little script was getting messy

Check. Can add it again.

Seems like I really have to remove packages and install them all over again. I have no update option.

[Goner]

No update option at all ? Did you wait for a little ? It could take a minute or two to refresh.
Or the updates went wrong when the repository went down and now Package Center thinks you're up to date ... in that case you would have to uninstall and do a fresh install.
But then you lose your settings.

I just updated Transmission 2.50 to 2.52, everything OK : all settings were kept.

[Smiggel]

No update option at all ? Did you wait for a little ? It could take a minute or two to refresh.
Or the updates went wrong when the repository went down and now Package Center thinks you're up to date ... in that case you would have to uninstall and do a fresh install.
But then you lose your settings.

I just updated Transmission 2.50 to 2.52, everything OK : all settings were kept.

I had no option in the Package Center. All packages were updated by me this morning. After the NAS crashed I could not boot some apps and I could not update them from that moment on, because I only have the package center link. I have no package files itself. (hope I explain it correctly).

I have installed Sickbeard, Headphone and Couchpotato server all over again, after I had removed them. That worked for now.

[Smiggel]

CouchPotato V2 is a little unstable.

When I install the package it runs. But when I restart the app, it will not start anymore. Anyone else having this problem?

I had to reboot my NAS in order to make the package run again. I can not stop and start it with the package center.

[heltendk]

This isn't the proper way to start it manually
This page is the display in DSM :p

To start, try "sabnzbd start"

I FINALLY found my problem with starting SABnzbd

Apparently something is wrong with my Python installation, even though I have done a reinstall of the Python package and never installed the Python package from Synology. I have even reinstalled all the other packages (CouchPotato etc.) but still SABnzbd would not start. It sounds strange but potentially this has been triggered by a previous Java installation...

But it turned out to be some localization problem that I fixed with this approach: http://forums.sabnzbd.org/viewtopic.php ... 78&p=63185

Thanks for these packages folks!

[Ltek]

@BUD77
I just updated all packages (all are from your repo - including Python) and they all ran fine until...

I run the SB update from the SB web page, using the link at the top saying...
"Unknown version: If you've never used the Sick Beard upgrade system then I don't know what version you have.— Update Now"

... to fix I had to uninstall SB, then reinstall from your repo.


Can you look into this?

thx

[BigMal]

I had couchpotato, SABNZBD, sickbeard and pyhton all running fine from your repo.
This morning I updated them all which seemed to go smoothly but now none of them will run.
I've rebooted my DS212j but they still won't run.

I did a fresh installed couchpotato server and that installed and ran nicely first time.

Do I have to uninstall and reinstall everything?

[Smiggel]

I had couchpotato, SABNZBD, sickbeard and pyhton all running fine from your repo.
This morning I updated them all which seemed to go smoothly but now none of them will run.
I've rebooted my DS212j but they still won't run.

I did a fresh installed couchpotato server and that installed and ran nicely first time.

Do I have to uninstall and reinstall everything?

Something like that happened to mee too. I had to remove the packages that did not run and did a new install. After that the packages run fine. Also after I rebooted my NAS to test if they would work. Not sure what is cousing the crashes.

[Smiggel]

Not sure it's an SynoCommunity issue or something else, but maybe others have the same problem.

I can not access CouchPotato Server from the web through a DDNS. I have an *.dsmynas.org DDNS from Synology. When I try to access the package through: *.dsmynas.org:5050 I don't reach the package. I have added a port forwarding to my router. Above method works fine for SABNZB, Sickbeard, Headphone and Couchpotato V1. No problems or what so ever. This problem only accurs with Couchpotato V2.

Is this an Couchpotato V2 issue or a SynoCommunity Package issue? Or perhaps something else? I have no problems when I make a VPN connection to the nas or when I am at home. It's only not accesible through the DDNS.

[bud77]

You can check the listening interface of each package (in settings) if it is listening to 0.0.0.0 (which means all available IPs)

Also, make sure there no conflict with synology's firewall

[Smiggel]

You can check the listening interface of each package (in settings) if it is listening to 0.0.0.0 (which means all available IPs)

Also, make sure there no conflict with synology's firewall

Checked it. It works on all packages, except for the Couchpotato V2. There are no items in my Synology firewall.

[bud77]

Could anyone else confirm Smiggel's issue ?

[ytsejam1138]

Could anyone else confirm Smiggel's issue ?

I can confirm this. However, before running the upgrades all the default ports were changed and working. After the upgrade, I was forced to uninstall and reinstall.