Hi All,
I recently got a DS2411+ & setup my volume like this; Volume1 = 4x 2TB - SHA2. However I have noticed after installing packages and setting things up, that most of the services and packages all run using this volume. Downloads / CloudSync etc.
So I would like to make volume1 into volume2 without migrating the data and use a 1TB drive as my cache/active drive (volume1). Basically the idea is to let the my main storage raid sleep when not in use.
How would I go about doing it??
Tweaking Volume Setups SHA-2
Forum rules
This is a user forum for Synology users to share experience/help out each other: if you need direct assistance from the Synology technical support team, please use the following form:
https://myds.synology.com/support/suppo ... p?lang=enu
This is a user forum for Synology users to share experience/help out each other: if you need direct assistance from the Synology technical support team, please use the following form:
https://myds.synology.com/support/suppo ... p?lang=enu
4 posts
• Page 1 of 1
Tweaking Volume Setups SHA-2
by pieterisme » Thu Aug 02, 2012 5:59 am
- pieterisme
- I'm New!
- Posts: 6
- Joined: Tue Jul 31, 2012 6:19 pm
Re: Tweaking Volume Setups SHA-2
by HarryPotter » Thu Aug 02, 2012 9:11 am
pieterisme wrote:Basically the idea is to let the my main storage raid sleep when not in use.
Which is not possible because either all or none of the disks are hibernating.
*Please do not Private Message me for support questions; leave it on the forum so all members can learn. Thanks!*
DS712+ / DSM 4.2 3211 / 2 x HD204UI (RAID0) / LMS 7.7.2-007
DS110+ / DSM 4.2 3211 / HD154UI
DS408 / DSM 4.0 2228 / 3 x ST31000340AS (RAID0) + 1 x HDS721010KLA330
DS207+ / DSM 3.1.1636 / ST31000340AS + WD5000KS
DS-106x / DSM 4.0 2228 (from DS108j) /
2 Squeezebox 3 + Boom
Rapsody N35
APC Smart UPS SUA750i
DS712+ / DSM 4.2 3211 / 2 x HD204UI (RAID0) / LMS 7.7.2-007
DS110+ / DSM 4.2 3211 / HD154UI
DS408 / DSM 4.0 2228 / 3 x ST31000340AS (RAID0) + 1 x HDS721010KLA330
DS207+ / DSM 3.1.1636 / ST31000340AS + WD5000KS
DS-106x / DSM 4.0 2228 (from DS108j) /
2 Squeezebox 3 + Boom
Rapsody N35
APC Smart UPS SUA750i
-
HarryPotter - Honorary Moderator
- Posts: 12326
- Joined: Mon Oct 23, 2006 12:48 pm
- Location: Switzerland
Re: Tweaking Volume Setups SHA-2
by pieterisme » Thu Aug 02, 2012 12:26 pm
Thank you for replying,
Maybe "sleep" hibernate was the wrong term, lets just say the main raid would not be spun up or being accessed with read/write, and only the cache volume would be active.
With terminology aside any one?
Maybe "sleep" hibernate was the wrong term, lets just say the main raid would not be spun up or being accessed with read/write, and only the cache volume would be active.
With terminology aside any one?
- pieterisme
- I'm New!
- Posts: 6
- Joined: Tue Jul 31, 2012 6:19 pm
Re: Tweaking Volume Setups SHA-2
by docchris » Mon Aug 06, 2012 11:44 pm
they would still be spun up - they just wouldn't be reading or writing as often
cant you just change the packages to point at volume 2?
cant you just change the packages to point at volume 2?
- docchris
- Knowledgeable
- Posts: 320
- Joined: Wed Aug 25, 2010 10:22 pm
4 posts
• Page 1 of 1
Return to Installation, Configuration, Migration, Expansion
Who is online
Users browsing this forum: No registered users and 5 guests