Topics pertaining to volume setup, boot/shutdown, initialization, DSM update, HDD migration.
by vonRasmussen » Sun Nov 11, 2007 9:35 pm
Hi.
I've just installed my new CS407 and (due to extreamly poor LAN performance) upgraded to firmware 2.0.3 - 0518.
Before as well as after the firmware upgrade, the 3 disk drives configured as RAID5, are a bit active every 30 sec. - even though nothing on the LAN is active. I even see this activity when all other units on the LAN are turned off.
What is causing this?
Also - I seen somewhere about hybernate. Is it possible to setup the delay for when the unit is going into hybernate?
Br
vonRasmussen
-
vonRasmussen
- Trainee

-
- Posts: 14
- Joined: Sun Nov 11, 2007 12:00 pm
by Trolli » Mon Nov 12, 2007 9:50 am
Your HDD activity is almost certain because of the reindexing of your multimedia files.
Hibernation time can be set in the Webinterface.
Disk Station 1511+ - DSM 4.0 Beta - 2166
3x3TB Western Digital WD30EZRX, Raid 5
Disk Station 508 - DSM 3.2 - 1922
5x1TB Western Digital WD10EADS, Raid5
Moderator @ German Synology Forum
-
Trolli
- Enlightened

-
- Posts: 406
- Joined: Thu Jul 12, 2007 7:53 am
- Location: Germany
by vonRasmussen » Mon Nov 12, 2007 10:16 am
Hi Trolli.
I've disabled the madia-stuff, iTunes etc. I'm only using the unit as file server.
Do you have any other ideas?
I must have overlooked the hibernate setting in the web GUI. Could I ask you to specify the navigation path to the setting?
Br
vonRasmussen
-
vonRasmussen
- Trainee

-
- Posts: 14
- Joined: Sun Nov 11, 2007 12:00 pm
by Trolli » Mon Nov 12, 2007 10:31 am
I'm not sure - but I think the indexing of multimedia-files will be done even if the multimedia-services are disabled.
Hibernation settings can be found in System -> Power management
Disk Station 1511+ - DSM 4.0 Beta - 2166
3x3TB Western Digital WD30EZRX, Raid 5
Disk Station 508 - DSM 3.2 - 1922
5x1TB Western Digital WD10EADS, Raid5
Moderator @ German Synology Forum
-
Trolli
- Enlightened

-
- Posts: 406
- Joined: Thu Jul 12, 2007 7:53 am
- Location: Germany
Return to Installation, Configuration, Migration, Expansion
Who is online
Users browsing this forum: No registered users and 4 guests