DS212j keeps crashing

[GiddyUpHorsey]

I've just received my new DS212j a day ago and have set it up and started transferring my data over to it, but it keeps crashing randomly multiple times throughout the day. When it crashes I hear a beep and the blue light on the front of the device is flashing.

In the system log it says: "System booted up from an improper shutdown".
I get an email notification that says: "DiskStation suffered from power failure and was shut down improperly."

The DiskStation is plugged into a UPS along with other devices that are working normally. I doubt that power failure is the real issue here.

I've logged a support ticket, but no reply yet.

Anyone know what could be the problem here?

Synology Model Number: DS212j
Firmware Version Number: DSM 4.0-2198
HDD Model Number: WD20EARX
Number of HDDs: 2
RAID Type: SHR
Network Bandwidth/MTU: 1000Mbps/1500
Services enabled: WebDAV (HTTPS), Windows File System, Audio Station, Download Station, Media Server
Hibernation time: 15m
External Devices: NexStar 3 Drive Enclosure w/ Seagate 250GB HDD

[GiddyUpHorsey]

It just happened again. Probably about the 15th time since purchase. It hasn't even been in my possession for 48 hours yet.

I noticed that the two disk lights were flashing yellow and the blue power light was flashing. After about a minute the device beeps and then it boots up.

When I log into DSM the Storage Manager shows the volume as resynchronizing.

[harleyvrodred]

Do you have the UPS connected to your DS212j?

I would suspect the NAS is thinking it's about to lose power for some reason.

You could try using a different UPS, idea being that there is an issue with the one you have.

You might simply bypass using a UPS, plug into the wall, (suggest you keep a surge protector though).

Otherwise, if you're savoy, what's it say in the /var/log/messages file at that time?

[GiddyUpHorsey]

How do I check var/log/messages?

I don't know Linux well.

I've managed to connect using PuTTY for Windows but can't see a var directory. Using su or sudo to try an log on as root doesn't work.

[GiddyUpHorsey]

Ok, I managed to figure out how to view the messages.

Here is the log spanning the time of the last crash and reboot. I received an email from the DiskStation at 15:28. I don't know much about Linux, but to me the log just looks like a boot sequence, nothing stands out to me as the cause of the crashes.

Code: Select all

Apr  9 14:52:42 kernel: [27425.930000] ata2: link reset sucessfully clear error flags
Apr  9 14:52:42 kernel: [27426.040000] ata2.00: Disable disk write cache in EH
Apr  9 15:26:31 syslogd started: BusyBox v1.16.1
Apr  9 15:26:33 spacetool: spacetool.c:2207 [Info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [zXVqqk-c842-qx4z-uNBN-qZ67-LxpF-RLixLk]
Apr  9 15:26:33 spacetool: spacetool.c:2214 [Info] Activate all VG
Apr  9 15:26:33 spacetool: spacetool.c:2225 Activate LVM [/dev/vg1000]
Apr  9 15:26:42 scemd: scemd.c:127 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Apr  9 15:26:42 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Apr  9 15:26:43 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
Apr  9 15:26:43 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
Apr  9 15:26:43 scemd: modules/disk_hibernation.c:459 Force hibernation enable, idle minutes 15
Apr  9 15:26:43 scemd: modules/disk_hibernation.c:467 SATA Deep sleep timer 1
Apr  9 15:26:44 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Apr  9 15:26:45 synocheckshare: Fix shares in smb.conf.
Apr  9 15:26:51 synousbdisk: RCClean succeeded
Apr  9 15:26:51 synosata: synosata.c:150 failed to enum all external sata devices
Apr  9 15:26:51 scemd: disk/disk_config_all.c:62 apply /usr/syno/bin/syno_disk_ctl --wcache-off  /dev/sda 1>/dev/null 2>&1
Apr  9 15:26:52 kernel: [   61.640000] ata1.00: Disable disk write cache in EH
Apr  9 15:26:52 scemd: disk/disk_config_all.c:62 apply /usr/syno/bin/syno_disk_ctl --wcache-off  /dev/sdb 1>/dev/null 2>&1
Apr  9 15:26:52 kernel: [   61.750000] ata2.00: Disable disk write cache in EH
Apr  9 15:26:52 kernel: [   62.330000] Got empty serial number. Generate serial number from product.
Apr  9 15:26:53 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Apr  9 15:26:53 syno_hdd_util: Model:[WD20EARX-00PASB0], Firmware:[51.0AB51], S/N:[WD-WMAZA7677678] in [/dev/sdb] is not ssd
Apr  9 15:26:53 syno_hdd_util: Model:[WD20EARX-00PASB0], Firmware:[51.0AB51], S/N:[WD-WMAZA7713470] in [/dev/sda] is not ssd
Apr  9 15:26:53 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Apr  9 15:26:55 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr  9 15:26:55 hotplugd: ##### ACTION:add
Apr  9 15:26:55 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr  9 15:26:55 hotplugd: DEVPATH:usb1
Apr  9 15:26:55 hotplugd: SUBSYSTEM:usb
Apr  9 15:26:55 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Apr  9 15:26:55 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Apr  9 15:26:55 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr  9 15:26:55 hotplugd: ##### ACTION:add
Apr  9 15:26:55 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr  9 15:26:55 hotplugd: DEVPATH:1-0:1.0
Apr  9 15:26:55 hotplugd: SUBSYSTEM:usb
Apr  9 15:26:55 hotplugd: INTERFACE:9/0/0
Apr  9 15:26:55 hotplugd: ##### ACTION:add
Apr  9 15:26:55 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr  9 15:26:55 hotplugd: DEVPATH:1-1
Apr  9 15:26:55 hotplugd: SUBSYSTEM:usb
Apr  9 15:26:55 hotplugd: ##### ACTION:add
Apr  9 15:26:55 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr  9 15:26:55 hotplugd: DEVPATH:1-1:1.0
Apr  9 15:26:55 hotplugd: SUBSYSTEM:usb
Apr  9 15:26:55 hotplugd: INTERFACE:9/0/0
Apr  9 15:26:55 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr  9 15:26:55 hotplugd: ##### ACTION:add
Apr  9 15:26:55 hotplugd: DEVICE:/proc/bus/usb/001/003
Apr  9 15:26:55 hotplugd: DEVPATH:1-1.2
Apr  9 15:26:55 hotplugd: SUBSYSTEM:usb
Apr  9 15:26:55 hotplugd: ##### ACTION:add
Apr  9 15:26:55 hotplugd: DEVICE:/proc/bus/usb/001/003
Apr  9 15:26:55 hotplugd: DEVPATH:1-1.2:1.0
Apr  9 15:26:55 hotplugd: SUBSYSTEM:usb
Apr  9 15:26:55 hotplugd: INTERFACE:8/6/80
Apr  9 15:26:55 cups-lpd[5810]: Unable to connect to server: Connection refused
Apr  9 15:26:57 upnpd: (upnpd.c:232) upnpd.c(232) : IP change (old IP = NULL, new IP = 121.73.36.223)
Apr  9 15:26:58 kernel: [   67.980000] drivers/scsi/sd.c (2344) Got USB disk
Apr  9 15:27:06 kernel: [   75.670000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
Apr  9 15:27:06 kernel: [   75.680000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
Apr  9 15:27:06 kernel: [   75.700000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
Apr  9 15:27:07 hotplugd: ##### ACTION:add
Apr  9 15:27:07 hotplugd: DEVNAME:sdq
Apr  9 15:27:07 hotplugd: DEVICE:/proc/bus/usb/001/003
Apr  9 15:27:07 hotplugd: DEVGUID:ABCDEF01234573130
Apr  9 15:27:07 hotplugd: DEVPATH:sdq
Apr  9 15:27:07 hotplugd: SUBSYSTEM:block
Apr  9 15:27:07 hotplugd: PHYSDEVPATH:/devices/platform/orion-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host2/target2:0:0/2:0:0:0
Apr  9 15:27:08 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr  9 15:27:08 hotplugd: hotplugd.c (1390) ==== USB disk [sdq] plugged in ====
Apr  9 15:27:08 hotplugd: hotplugd.c:1391 goto USB disk, szDeviceName=sdq
Apr  9 15:27:08 hotplugd: hotplugd.c:1393 ret=-1, fsType=0
Apr  9 15:27:17 logout.cgi: login.c (810) SynoCgiLoginRemoveUser failed.
Apr  9 15:28:51 scemd: scemd.c:324 stop manutild.

[awerner9]

WOW man... I literally just purchased the exact same combo of hardware off of amazon a couple hours ago...

If I run into anything, I will let you know!

[alexndr]

I have the same problem but with a different setup. DSM 4.0, 2 x 2 TB Samsung DH204UI in RAID -1 mode, external 1,5 TB WD USB drive. Reboots with mentioned error message approx. once every hour under no load at all. Maybe the USB device is causing it? I'll try to disconnect it to see wether it helps or not.

/Alex

[GiddyUpHorsey]

I had moved my DS212j to another power socket on my UPS but was still getting crashes.

Then I moved it to just a surge protector and also moved the device away from the other computers it was sitting next to (they get quite hot). I've now managed to get 37.5 hours uptime with no crashes.

I'm wondering if:
* The UPS is faulty
* The DS212j is very sensitive to its power source
* The DS212j is very sensitive to heat

I'm going to power it down and plug it back into the UPS, but leave it in the same location. Hopefully this should give some indication of whether it's the heat or being plugged into the UPS that is causing the crashes.

I finally got a response from Synology. They asked me to send them the debug.dat file, but I've not heard from them since.

[alexndr]

After unplugging the External USB - device (which has it's own power source) my DS212j has been running without issues for 24 hours now. I'm not using an UPS so I think you can rule that one out. Your other two suggestions regarding sensitivy sounds reasonable considering my experiences. Let's see what the Synology has to say about it.

/Alex

[alexndr]

I have connected my USB-device again with out any issues occurring for a couple of days now. I'm starting to suspect that the power failure was caused by the station overheating. My hard discs were re-synchronizating (preparing for RAID-1) and I was copying files between them and the USB-device when it happened. As soon as the re-synch process finished I could copy files between the drives with out any hazzle.

/Alex

[GiddyUpHorsey]

Having moved the DiskStation away from other computers, I'd had uptime of 7 days. I decided to plug in my external HDD and got two crashes within ten minutes of each other.

I'm convinced that the DiskStation is not very heat tolerant and that there are some defects in DSM 4 related to USB devices.

[Ujeen]

Same issue here with brand new DS212j I bought this week. It managed to unexpectedly shutdown two times already within 2 days when I was copying files from my desktop to it. Don't understand the reason of it. Thanksfully I can send the diskstation back if this keeps happening.
The screenshot:


The entire /var/log/messages since I have installed the DSM(the log is not so long as I haven't been working with the diskstation much):

Code: Select all

phad> cat /var/log/messages
Feb 23 07:42:52 syslogd started: BusyBox v1.16.1
Feb 23 07:42:52 s00_synocheckfstab: s00_synocheckfstab.c:46 [Info] NO volume exists, skip generate fstab
Feb 23 07:42:52 s00_synocheckfstab: volume_readahead_allset.c:18 [Info] NO volume exists, skip generate fstab
Feb 23 07:42:52 dhcpcd[2776]: dhcpReboot: do not want cache
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(704): value=[cups] and default value=[cups] not matched
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(704): value=[cups] and default value=[cups] not matched
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(794): append default setting = [printcap name=cups]
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(794): append default setting = [winbind enum groups=yes]
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(794): append default setting = [realm=*]
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(794): append default setting = [passdb backend=smbpasswd]
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(794): append default setting = [printing=cups]
Feb 23 07:42:52 s30_synocheckuser: CheckSmbConf(794): append default setting = [winbind enum users=yes]
Feb 23 07:42:53 synologset1: SYNOLogChangeSize : logfile /var/log/synosys.log not existed
Feb 23 07:42:58 scemd: scemd.c:128 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Feb 23 07:42:58 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Feb 23 07:42:59 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 2
Feb 23 07:42:59 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 2
Feb 23 07:42:59 scemd: modules/disk_hibernation.c:683 Force hibernation enable, idle minutes 20
Feb 23 07:42:59 scemd: modules/disk_hibernation.c:691 SATA Deep sleep timer 1
Feb 23 07:42:59 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Feb 23 07:42:59 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Feb 23 07:42:59 synocheckshare: synocheckshare.c:889 Failed to enable PGSQL [0x8300]
Feb 23 07:43:00 synousbdisk: RCClean succeeded
Feb 23 07:43:00 synosata: synosata.c:150 failed to enum all external sata devices
Feb 23 07:43:01 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Feb 23 07:43:01 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Feb 23 07:43:07 kernel: [   94.010000] Got empty serial number. Generate serial number from product.
Feb 23 07:43:08 syno_hdd_util: Model:[WD1001FALS-00J7B], Firmware:[05.00K05], S/N:[WD-WMATV0752482] in [/dev/sda] is not ssd
Feb 23 07:43:09 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Feb 23 07:43:09 hotplugd: ##### ACTION:add
Feb 23 07:43:09 hotplugd: DEVICE:/proc/bus/usb/001/001
Feb 23 07:43:09 hotplugd: DEVPATH:usb1
Feb 23 07:43:09 hotplugd: SUBSYSTEM:usb
Feb 23 07:43:09 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Feb 23 07:43:09 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Feb 23 07:43:09 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Feb 23 07:43:09 hotplugd: ##### ACTION:add
Feb 23 07:43:09 hotplugd: DEVICE:/proc/bus/usb/001/001
Feb 23 07:43:09 hotplugd: DEVPATH:1-0:1.0
Feb 23 07:43:09 hotplugd: SUBSYSTEM:usb
Feb 23 07:43:09 hotplugd: INTERFACE:9/0/0
Feb 23 07:43:09 hotplugd: ##### ACTION:add
Feb 23 07:43:09 hotplugd: DEVICE:/proc/bus/usb/001/002
Feb 23 07:43:09 hotplugd: DEVPATH:1-1
Feb 23 07:43:09 hotplugd: SUBSYSTEM:usb
Feb 23 07:43:09 hotplugd: ##### ACTION:add
Feb 23 07:43:09 hotplugd: DEVICE:/proc/bus/usb/001/002
Feb 23 07:43:09 hotplugd: DEVPATH:1-1:1.0
Feb 23 07:43:09 hotplugd: SUBSYSTEM:usb
Feb 23 07:43:09 hotplugd: INTERFACE:9/0/0
Feb 23 07:43:09 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Feb 23 07:43:17 synofstool: volume_fs_cache_dump.c:38 [Info] NO volume exists, skip generate fstab
Feb 23 07:43:18 volumetool: volumehandler.cpp:663 Disk: [/dev/sda], is formated as syno partition, but has no data volume
Feb 23 07:43:18 volumetool: space_disk_data_partition_clean.c:44 [Info] Clean data partition on /dev/sda
Feb 23 07:43:19 volumetool: space_disk_data_partition_create.c:78 [Info] Create multiple logical partition on /dev/sda, partNo: 5
Feb 23 07:43:19 volumetool: partition_logical_create.c:59 partition layout: 7
Feb 23 07:43:19 volumetool: partition_table_type_get.c:52 pTable 2
Feb 23 07:51:16 dhcpcd[8353]: dhcpReboot: do not want cache
Apr 18 23:14:10 synorelayd: stop failed, start again
killall: synolunbkp: no process killed
Apr 18 12:14:42 crond[3142]: time disparity of 605003 minutes detected
Apr 18 23:15:02 initdata.cgi: initdata.cpp:392 Upgrade admin wallpaper setting to 4.0 success
Apr 18 01:08:00 crond[3142]: time disparity of -719 minutes detected
Apr 18 12:58:11 findhostd: net_set_card1.c(170) : HUP ddnsd result: no such service or not enabled
Apr 18 12:58:21 synorelayd: stop failed, start again
killall: synolunbkp: no process killed
Apr 18 13:09:01 scemd: modules/rtc.c:146 RTC and system time diff are too large. rtc_year:[112] rtc_mon:[3] rtc_mday:[18] rtc_hour:[21] sys_year:[112] sys_mon:[3] sys_mday:[18] sys_hour:[9] timezone:[-14400]
Apr 18 13:09:05 scemd: modules/rtc.c:146 RTC and system time diff are too large. rtc_year:[112] rtc_mon:[3] rtc_mday:[18] rtc_hour:[21] sys_year:[112] sys_mon:[3] sys_mday:[18] sys_hour:[9] timezone:[-14400]
Apr 18 13:09:05 scemd: modules/rtc.c:164 RTC looks like fine, maybe system error let it update
Apr 18 14:10:01 crond[3142]: time disparity of 721 minutes detected
Apr 19 01:12:28 dhcpcd[24086]: dhcpReboot: do not want cache
Apr 19 01:12:38 synorelayd: stop failed, start again
killall: synolunbkp: no process killed
Apr 19 01:18:57 dhcpcd[24086]: client.c(1589)HUP ddnsd result: return code = 256
Apr 19 01:19:07 synorelayd: stop failed, start again
killall: synolunbkp: no process killed
Apr 19 01:27:30 syslogd started: BusyBox v1.16.1
Apr 19 01:27:30 dhcpcd[2574]: dhcpReboot: do not want cache
Apr 19 01:27:30 s00_synocheckfstab: s00_synocheckfstab.c:46 [Info] NO volume exists, skip generate fstab
Apr 19 01:27:30 s00_synocheckfstab: volume_readahead_allset.c:18 [Info] NO volume exists, skip generate fstab
Apr 19 01:27:31 dhcpcd[2574]: client.c(1589)HUP ddnsd result: return code = 256
Apr 19 01:27:36 scemd: scemd.c:128 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Apr 19 01:27:36 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Apr 19 01:27:37 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 2
Apr 19 01:27:37 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 2
Apr 19 01:27:37 scemd: modules/disk_hibernation.c:683 Force hibernation enable, idle minutes 20
Apr 19 01:27:37 scemd: modules/disk_hibernation.c:691 SATA Deep sleep timer 1
Apr 19 01:27:37 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Apr 19 01:27:37 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Apr 19 01:27:37 synocheckshare: synocheckshare.c:889 Failed to enable PGSQL [0x8300]
Apr 19 01:27:37 synousbdisk: RCClean succeeded
Apr 19 01:27:38 synosata: synosata.c:150 failed to enum all external sata devices
Apr 19 01:27:39 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Apr 19 01:27:39 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Apr 19 01:27:46 kernel: [   58.090000] Got empty serial number. Generate serial number from product.
Apr 19 01:27:46 syno_hdd_util: Model:[WD1001FALS-00J7B], Firmware:[05.00K05], S/N:[WD-WMATV0752482] in [/dev/sda] is not ssd
Apr 19 01:27:47 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 19 01:27:47 hotplugd: ##### ACTION:add
Apr 19 01:27:47 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 19 01:27:47 hotplugd: DEVPATH:usb1
Apr 19 01:27:47 hotplugd: SUBSYSTEM:usb
Apr 19 01:27:47 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Apr 19 01:27:47 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Apr 19 01:27:47 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 19 01:27:47 hotplugd: ##### ACTION:add
Apr 19 01:27:47 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 19 01:27:47 hotplugd: DEVPATH:1-0:1.0
Apr 19 01:27:47 hotplugd: SUBSYSTEM:usb
Apr 19 01:27:47 hotplugd: INTERFACE:9/0/0
Apr 19 01:27:47 hotplugd: ##### ACTION:add
Apr 19 01:27:47 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 19 01:27:47 hotplugd: DEVPATH:1-1
Apr 19 01:27:47 hotplugd: SUBSYSTEM:usb
Apr 19 01:27:48 hotplugd: ##### ACTION:add
Apr 19 01:27:48 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 19 01:27:48 hotplugd: DEVPATH:1-1:1.0
Apr 19 01:27:48 hotplugd: SUBSYSTEM:usb
Apr 19 01:27:48 hotplugd: INTERFACE:9/0/0
Apr 19 01:27:48 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr 19 01:27:54 synofstool: volume_fs_cache_dump.c:38 [Info] NO volume exists, skip generate fstab
Apr 19 01:29:24 volumehandler.cgi: space_disk_data_partition_clean.c:44 [Info] Clean data partition on /dev/sda
Apr 19 01:29:29 volumehandler.cgi: space_disk_data_partition_create.c:78 [Info] Create multiple logical partition on /dev/sda, partNo: 5
Apr 19 01:29:29 volumehandler.cgi: partition_logical_create.c:59 partition layout: 7
Apr 19 01:29:29 volumehandler.cgi: partition_table_type_get.c:52 pTable 2
Apr 19 01:29:45 scemd: scemd.c:325 stop manutild.
Apr 19 05:11:32 volumehandler.cgi: space_create.c:680 [Info] Create RAID: /dev/md2, RAID level: 2, device items: 1, spare disk: 0, device type: 1
Apr 19 05:14:49 mkfs.ext4: (write_inode_tables) write cache is 1 ...
Apr 19 05:15:23 synoindex: synoindex.c (480) Indexing daemon is not running
Apr 19 07:17:22 kernel: [21031.690000] ata1: wake up from deepsleep, reset link now
Apr 19 07:17:22 kernel: [21031.780000] ata1: device plugged sstatus 0x123
Apr 19 07:17:22 kernel: [21034.710000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Apr 19 07:17:22 kernel: [21034.720000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Apr 19 07:17:22 kernel: [21034.720000] ata1: SError: { PHYRdyChg DevExch }
Apr 19 07:17:28 kernel: [21040.680000] ata1: link is slow to respond, please be patient (ready=0)
Apr 19 07:17:32 kernel: [21044.760000] ata1: SRST failed (errno=-16)
Apr 19 07:17:32 kernel: [21044.760000] ata1: SRST fail, set srst fail flag
Apr 19 07:17:37 kernel: [21050.120000] ata1: link reset sucessfully clear error flags
Apr 19 07:30:13 kernel: [21806.020000] svc: failed to register lockdv1 RPC service (errno 97).
Apr 19 07:30:13 kernel: [21806.030000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Apr 19 07:30:13 sm-notify[21149]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Apr 19 07:32:25 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 19 07:32:25 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 19 07:32:25 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 19 07:32:27 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 19 07:32:33 scemd: scemd: power button pressed, ret = 0
Apr 19 07:32:33 scemd: SCEMD: Shutdown the system.
Apr 19 07:32:34 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Apr 19 07:32:38 postfix[21960]: fatal: chdir(/var/spool/postfix): No such file or directory
rmmod: can't unload 'nfsd': Resource temporarily unavailable
rmmod: can't unload 'exportfs': Resource temporarily unavailable
rmmod: can't unload 'auth_rpcgss': Resource temporarily unavailable
killall: synolunbkp: no process killed
Apr 19 07:32:54 syslogd exiting
Apr 19 23:02:26 syslogd started: BusyBox v1.16.1
Apr 19 23:02:27 spacetool: spacetool.c:2207 [Info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [O514Ar-kkiQ-Rpt2-G3Bk-7Yyp-4Zn2-intnES]
Apr 19 23:02:27 spacetool: spacetool.c:2214 [Info] Activate all VG
Apr 19 23:02:27 spacetool: spacetool.c:2225 Activate LVM [/dev/vg1000]
Apr 19 23:02:27 dhcpcd[2574]: dhcpReboot: do not want cache
Apr 19 23:02:35 scemd: scemd.c:128 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Apr 19 23:02:35 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Apr 19 23:02:36 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 2
Apr 19 23:02:36 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 2
Apr 19 23:02:36 scemd: modules/disk_hibernation.c:683 Force hibernation enable, idle minutes 20
Apr 19 23:02:36 scemd: modules/disk_hibernation.c:691 SATA Deep sleep timer 1
Apr 19 23:02:36 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Apr 19 23:02:36 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Apr 19 23:02:38 synousbdisk: RCClean succeeded
Apr 19 23:02:38 synosata: synosata.c:150 failed to enum all external sata devices
Apr 19 23:02:40 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Apr 19 23:02:40 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Apr 19 23:02:45 kernel: [   59.830000] Got empty serial number. Generate serial number from product.
Apr 19 23:02:46 syno_hdd_util: Model:[WD1001FALS-00J7B], Firmware:[05.00K05], S/N:[WD-WMATV0752482] in [/dev/sda] is not ssd
Apr 19 23:02:47 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 19 23:02:47 hotplugd: ##### ACTION:add
Apr 19 23:02:47 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 19 23:02:47 hotplugd: DEVPATH:usb1
Apr 19 23:02:47 hotplugd: SUBSYSTEM:usb
Apr 19 23:02:47 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Apr 19 23:02:47 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Apr 19 23:02:47 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 19 23:02:47 hotplugd: ##### ACTION:add
Apr 19 23:02:47 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 19 23:02:47 hotplugd: DEVPATH:1-0:1.0
Apr 19 23:02:47 hotplugd: SUBSYSTEM:usb
Apr 19 23:02:47 hotplugd: INTERFACE:9/0/0
Apr 19 23:02:47 hotplugd: ##### ACTION:add
Apr 19 23:02:47 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 19 23:02:47 hotplugd: DEVPATH:1-1
Apr 19 23:02:47 hotplugd: SUBSYSTEM:usb
Apr 19 23:02:47 hotplugd: ##### ACTION:add
Apr 19 23:02:47 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 19 23:02:47 hotplugd: DEVPATH:1-1:1.0
Apr 19 23:02:47 hotplugd: SUBSYSTEM:usb
Apr 19 23:02:47 hotplugd: INTERFACE:9/0/0
Apr 19 23:02:47 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr 19 23:02:54 kernel: [   69.140000] svc: failed to register lockdv1 RPC service (errno 97).
Apr 19 23:02:54 kernel: [   69.160000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Apr 19 23:02:54 sm-notify[6372]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Apr 19 23:51:05 kernel: [ 2956.260000] ata1: wake up from deepsleep, reset link now
Apr 19 23:51:05 kernel: [ 2956.360000] ata1: device plugged sstatus 0x123
Apr 19 23:51:05 kernel: [ 2959.280000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Apr 19 23:51:05 kernel: [ 2959.290000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Apr 19 23:51:05 kernel: [ 2959.300000] ata1: SError: { PHYRdyChg DevExch }
Apr 19 23:51:11 kernel: [ 2965.260000] ata1: link is slow to respond, please be patient (ready=0)
Apr 19 23:51:15 kernel: [ 2969.340000] ata1: SRST failed (errno=-16)
Apr 19 23:51:15 kernel: [ 2969.340000] ata1: SRST fail, set srst fail flag
Apr 19 23:51:20 kernel: [ 2974.400000] ata1: link reset sucessfully clear error flags
Apr 19 23:51:20 dhcpcd[2574]: client.c(1589)HUP ddnsd result: return code = 256
Apr 19 23:51:30 synorelayd: stop failed, start again
killall: synolunbkp: no process killed
Apr 20 00:38:38 scemd: scemd.c:199 stop manutild.
Apr 20 00:47:51 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 00:47:51 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 00:47:51 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 00:47:54 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 00:50:18 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 01:02:31 shareman.cgi: share_delete.c:779 Start to del video with id 5
Apr 20 01:05:53 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 01:06:02 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 01:08:41 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 01:11:02 PkgSynoMan.cgi: pkgtool.cpp:2985 http://update.synology.com/packageupdate/getpackages.php, Failed to curl perform, code=6, err=Couldn't resolve host name
Apr 20 01:11:59 scemd: scemd: power button pressed, ret = 0
Apr 20 01:11:59 scemd: SCEMD: Shutdown the system.
Apr 20 01:12:00 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
rmmod: can't unload 'nfsd': Resource temporarily unavailable
rmmod: can't unload 'exportfs': Resource temporarily unavailable
rmmod: can't unload 'auth_rpcgss': Resource temporarily unavailable
killall: synolunbkp: no process killed
Apr 20 01:12:18 syslogd exiting
Apr 20 22:10:45 syslogd started: BusyBox v1.16.1
Apr 20 22:10:45 dhcpcd[2576]: dhcpReboot: do not want cache
Apr 20 22:10:46 spacetool: spacetool.c:2207 [Info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [O514Ar-kkiQ-Rpt2-G3Bk-7Yyp-4Zn2-intnES]
Apr 20 22:10:46 spacetool: spacetool.c:2214 [Info] Activate all VG
Apr 20 22:10:46 spacetool: spacetool.c:2225 Activate LVM [/dev/vg1000]
Apr 20 22:10:46 dhcpcd[2576]: client.c(1589)HUP ddnsd result: return code = 256
Apr 20 22:10:54 scemd: scemd.c:128 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Apr 20 22:10:54 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Apr 20 22:10:55 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 2
Apr 20 22:10:55 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 2
Apr 20 22:10:55 scemd: modules/disk_hibernation.c:683 Force hibernation enable, idle minutes 20
Apr 20 22:10:55 scemd: modules/disk_hibernation.c:691 SATA Deep sleep timer 1
Apr 20 22:10:55 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Apr 20 22:10:56 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Apr 20 22:10:57 synousbdisk: RCClean succeeded
Apr 20 22:10:58 synosata: synosata.c:150 failed to enum all external sata devices
Apr 20 22:10:59 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Apr 20 22:10:59 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Apr 20 22:11:04 kernel: [   59.630000] Got empty serial number. Generate serial number from product.
Apr 20 22:11:05 syno_hdd_util: Model:[WD1001FALS-00J7B], Firmware:[05.00K05], S/N:[WD-WMATV0752482] in [/dev/sda] is not ssd
Apr 20 22:11:06 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 20 22:11:06 hotplugd: ##### ACTION:add
Apr 20 22:11:06 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 20 22:11:06 hotplugd: DEVPATH:usb1
Apr 20 22:11:06 hotplugd: SUBSYSTEM:usb
Apr 20 22:11:06 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Apr 20 22:11:06 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Apr 20 22:11:06 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 20 22:11:06 hotplugd: ##### ACTION:add
Apr 20 22:11:06 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 20 22:11:06 hotplugd: DEVPATH:1-0:1.0
Apr 20 22:11:06 hotplugd: SUBSYSTEM:usb
Apr 20 22:11:06 hotplugd: INTERFACE:9/0/0
Apr 20 22:11:06 hotplugd: ##### ACTION:add
Apr 20 22:11:06 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 20 22:11:06 hotplugd: DEVPATH:1-1
Apr 20 22:11:06 hotplugd: SUBSYSTEM:usb
Apr 20 22:11:06 hotplugd: ##### ACTION:add
Apr 20 22:11:06 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 20 22:11:06 hotplugd: DEVPATH:1-1:1.0
Apr 20 22:11:06 hotplugd: SUBSYSTEM:usb
Apr 20 22:11:06 hotplugd: INTERFACE:9/0/0
Apr 20 22:11:06 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr 20 22:11:14 kernel: [   69.870000] svc: failed to register lockdv1 RPC service (errno 97).
Apr 20 22:11:14 kernel: [   69.870000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Apr 20 22:11:14 sm-notify[6404]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Apr 20 22:13:03 scemd: scemd.c:325 stop manutild.
Apr 20 22:49:56 kernel: [ 2388.680000] ata1: wake up from deepsleep, reset link now
Apr 20 22:49:56 kernel: [ 2388.760000] ata1: device plugged sstatus 0x123
Apr 20 22:49:56 kernel: [ 2391.700000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Apr 20 22:49:56 kernel: [ 2391.700000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Apr 20 22:49:56 kernel: [ 2391.710000] ata1: SError: { PHYRdyChg DevExch }
Apr 20 22:50:02 kernel: [ 2397.670000] ata1: link is slow to respond, please be patient (ready=0)
Apr 20 22:50:06 kernel: [ 2401.750000] ata1: SRST failed (errno=-16)
Apr 20 22:50:06 kernel: [ 2401.750000] ata1: SRST fail, set srst fail flag
Apr 20 22:50:11 kernel: [ 2406.990000] ata1: link reset sucessfully clear error flags
Apr 20 23:08:32 scemd: scemd.c:199 stop manutild.
Apr 20 23:43:21 synologset1: SYNOLogChangeSize : logfile /var/log/synoconn.log not existed
Apr 20 23:56:50 mountd[6406]: refused mount request from 192.169.1.1 for /volume1/video (/): not exported
Apr 21 00:57:34 syslogd started: BusyBox v1.16.1
Apr 21 00:57:35 spacetool: spacetool.c:2207 [Info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [O514Ar-kkiQ-Rpt2-G3Bk-7Yyp-4Zn2-intnES]
Apr 21 00:57:35 spacetool: spacetool.c:2214 [Info] Activate all VG
Apr 21 00:57:35 spacetool: spacetool.c:2225 Activate LVM [/dev/vg1000]
Apr 21 00:57:35 dhcpcd[2574]: dhcpReboot: do not want cache
Apr 21 00:57:45 scemd: scemd.c:128 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Apr 21 00:57:45 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Apr 21 00:57:46 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 2
Apr 21 00:57:46 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 2
Apr 21 00:57:46 scemd: modules/disk_hibernation.c:683 Force hibernation enable, idle minutes 20
Apr 21 00:57:46 scemd: modules/disk_hibernation.c:691 SATA Deep sleep timer 1
Apr 21 00:57:46 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Apr 21 00:57:47 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Apr 21 00:57:49 synousbdisk: RCClean succeeded
Apr 21 00:57:49 synosata: synosata.c:150 failed to enum all external sata devices
Apr 21 00:57:50 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Apr 21 00:57:50 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Apr 21 00:57:55 kernel: [   62.590000] Got empty serial number. Generate serial number from product.
Apr 21 00:57:56 syno_hdd_util: Model:[WD1001FALS-00J7B], Firmware:[05.00K05], S/N:[WD-WMATV0752482] in [/dev/sda] is not ssd
Apr 21 00:57:57 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 21 00:57:57 hotplugd: ##### ACTION:add
Apr 21 00:57:57 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 21 00:57:57 hotplugd: DEVPATH:usb1
Apr 21 00:57:57 hotplugd: SUBSYSTEM:usb
Apr 21 00:57:57 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Apr 21 00:57:57 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Apr 21 00:57:57 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 21 00:57:57 hotplugd: ##### ACTION:add
Apr 21 00:57:57 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 21 00:57:57 hotplugd: DEVPATH:1-0:1.0
Apr 21 00:57:57 hotplugd: SUBSYSTEM:usb
Apr 21 00:57:57 hotplugd: INTERFACE:9/0/0
Apr 21 00:57:57 hotplugd: ##### ACTION:add
Apr 21 00:57:57 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 21 00:57:57 hotplugd: DEVPATH:1-1
Apr 21 00:57:57 hotplugd: SUBSYSTEM:usb
Apr 21 00:57:57 hotplugd: ##### ACTION:add
Apr 21 00:57:57 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 21 00:57:57 hotplugd: DEVPATH:1-1:1.0
Apr 21 00:57:57 hotplugd: SUBSYSTEM:usb
Apr 21 00:57:57 hotplugd: INTERFACE:9/0/0
Apr 21 00:57:57 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr 21 00:58:05 kernel: [   72.650000] svc: failed to register lockdv1 RPC service (errno 97).
Apr 21 00:58:05 kernel: [   72.670000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Apr 21 00:58:05 sm-notify[6406]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Apr 21 01:08:03 scemd: scemd: power button pressed, ret = 0
Apr 21 01:08:03 scemd: SCEMD: Shutdown the system.
Apr 21 01:08:03 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Apr 21 01:08:05 dhcpcd[2574]: client.c(1589)HUP ddnsd result: return code = 256
rmmod: can't unload 'nfsd': Resource temporarily unavailable
rmmod: can't unload 'exportfs': Resource temporarily unavailable
rmmod: can't unload 'auth_rpcgss': Resource temporarily unavailable
killall: synolunbkp: no process killed
Apr 21 01:08:20 synorelayd: stop failed, start again
killall: synolunbkp: no process killed
Apr 21 01:08:23 syslogd exiting
Apr 21 01:10:08 syslogd started: BusyBox v1.16.1
Apr 21 01:10:08 dhcpcd[2574]: dhcpReboot: do not want cache
Apr 21 01:10:09 spacetool: spacetool.c:2207 [Info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [O514Ar-kkiQ-Rpt2-G3Bk-7Yyp-4Zn2-intnES]
Apr 21 01:10:09 spacetool: spacetool.c:2214 [Info] Activate all VG
Apr 21 01:10:09 spacetool: spacetool.c:2225 Activate LVM [/dev/vg1000]
Apr 21 01:10:09 dhcpcd[2574]: client.c(1589)HUP ddnsd result: return code = 256
Apr 21 01:10:17 scemd: scemd.c:128 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Apr 21 01:10:17 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Apr 21 01:10:18 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 2
Apr 21 01:10:18 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 2
Apr 21 01:10:18 scemd: modules/disk_hibernation.c:683 Force hibernation enable, idle minutes 20
Apr 21 01:10:18 scemd: modules/disk_hibernation.c:691 SATA Deep sleep timer 1
Apr 21 01:10:18 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Apr 21 01:10:19 synocheckshare: service_disable_set.c(68)Not defined date : id=4
Apr 21 01:10:20 synousbdisk: RCClean succeeded
Apr 21 01:10:21 synosata: synosata.c:150 failed to enum all external sata devices
Apr 21 01:10:22 ddnsd: main(ddnsd.c:2938):  not enable DDNS, shutdown daemon
Apr 21 01:10:22 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Apr 21 01:10:27 kernel: [   59.930000] Got empty serial number. Generate serial number from product.
Apr 21 01:10:28 syno_hdd_util: Model:[WD1001FALS-00J7B], Firmware:[05.00K05], S/N:[WD-WMATV0752482] in [/dev/sda] is not ssd
Apr 21 01:10:29 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 21 01:10:29 hotplugd: ##### ACTION:add
Apr 21 01:10:29 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 21 01:10:29 hotplugd: DEVPATH:usb1
Apr 21 01:10:29 hotplugd: SUBSYSTEM:usb
Apr 21 01:10:29 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Apr 21 01:10:29 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Apr 21 01:10:29 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Apr 21 01:10:29 hotplugd: ##### ACTION:add
Apr 21 01:10:29 hotplugd: DEVICE:/proc/bus/usb/001/001
Apr 21 01:10:29 hotplugd: DEVPATH:1-0:1.0
Apr 21 01:10:29 hotplugd: SUBSYSTEM:usb
Apr 21 01:10:29 hotplugd: INTERFACE:9/0/0
Apr 21 01:10:29 hotplugd: ##### ACTION:add
Apr 21 01:10:29 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 21 01:10:29 hotplugd: DEVPATH:1-1
Apr 21 01:10:29 hotplugd: SUBSYSTEM:usb
Apr 21 01:10:29 hotplugd: ##### ACTION:add
Apr 21 01:10:29 hotplugd: DEVICE:/proc/bus/usb/001/002
Apr 21 01:10:29 hotplugd: DEVPATH:1-1:1.0
Apr 21 01:10:29 hotplugd: SUBSYSTEM:usb
Apr 21 01:10:29 hotplugd: INTERFACE:9/0/0
Apr 21 01:10:29 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Apr 21 01:10:37 kernel: [   70.400000] svc: failed to register lockdv1 RPC service (errno 97).
Apr 21 01:10:37 kernel: [   70.400000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Apr 21 01:10:37 sm-notify[6413]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Apr 21 01:12:26 scemd: scemd.c:325 stop manutild.


[Ujeen]

I reported the issue to the Synology support as it seems the synology guys don't realy care about reading this forum. (Hate to say that but if I don't have this solved in 3-4 days I'll have to take the ds212j back before the two week of my trial period ends).

[HarryPotter]

Ias it seems the synology guys don't realy care about reading this forum.

Because this is declared to be a user forum! If you need personal assistance by Sonology staff, submit a support form as you obviously already did.

[myCloud]

A few of things to check for:

Keep other equipment 3-4 inches (8-10 cm) away from the sides of the DiskStation (especially if that other equipment has side air intake, for its sake).

Make sure there's nothing blocking the front or the back of the Diskstation for a good 12 inches (30 cm) or so. You don't want anything blocking the intake or exhaust of the DiskStation or the fans of other equipment creating higher pressure behind the it.

Make sure the hot exhaust of other equipment can't be drawn into the front of the DiskStation.