libhidups 0x0003 0x050d 0x0900 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0665 ProdID=5161 Rev= 0.02
S: Manufacturer=Cypress Semiconductor
S: Product=USB to Serial
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
mills2k12 wrote:Not sure if anyone is going to be too fussed with this as already mentioned in user reported UPS compatability list...
But, connected APC BE700G-UK (aka APC Back UPS ES8 700VA) from Amazon and is readily recognised by DS212+ with DSM 3.2 in the DSM control panel.
dwwhite wrote:Looking to use an APC BackUPS XS1000 with my DS412+. Synology lists this as being compatible.
...Had to dig around in the NUT config files on the DS to determine apropriate user and password to set up the client...
Users browsing this forum: No registered users and 2 guests