SynoCommunity is glad to announce its new repo

The discussion lounge for third-party packages.
Forum rules
Please note the Disclaimer before modifying your Synology Product.

Re: SynoCommunity is glad to announce its new repo

Postby egoego » Tue Jan 08, 2013 8:17 am

bud77 wrote:
egoego wrote:I have installed the transmission package ( from synocommninity) on my new DS 1512+ . Before doing it, I have created shared folder "tranmsission" and user "trasmission" ( with R/W rights on the transmission folder). After that, I have created "download" and "watchfolder" folders under the trasmissioon share. During the installation, when asked about destinations, I have used the full paths:/volumes1/trasmission/dowload and /volume1/trasmission/watchfolder. The packaged was successfully installed but I can't run it ? When I try to run it, a message "failded to run the package service" appears ?
Did I do something wrong during the installation ? And can somebody help me to solve the problem ?


Delete the user & permissions you created. The user will be created by the package, with proper group permissions. Then reinstall package

PS: In your download folder path, there is a "S" in /volumeS1/ while there should not be


I have done it in this way and now it works. Thanks a lot for the help !
egoego
I'm New!
I'm New!
 
Posts: 5
Joined: Sat Jan 05, 2013 5:29 pm

Re: SynoCommunity is glad to announce its new repo

Postby tripkip » Tue Jan 08, 2013 9:33 am

Thanks for the great repo. Hope to see SABnzbd 0.7.9 real soon.
===========================
Synology DS413 DSM 5.0
SHR with 2 X 2TB + 2 x 3TB WD Red
tripkip
Beginner
Beginner
 
Posts: 25
Joined: Fri Dec 21, 2012 3:07 pm

Re: SynoCommunity is glad to announce its new repo

Postby Smiggel » Tue Jan 08, 2013 9:50 am

All packages run fine under DSM 4.2 beta! :-)
Smiggel
Apprentice
Apprentice
 
Posts: 85
Joined: Fri May 04, 2012 9:28 pm

Re: SynoCommunity is glad to announce its new repo

Postby bud77 » Tue Jan 08, 2013 9:53 am

Smiggel wrote:All packages run fine under DSM 4.2 beta! :-)


Glad to hear that. Thanks for the info !

tripkip wrote:Thanks for the great repo. Hope to see SABnzbd 0.7.9 real soon.


It's been out since 3 days ... please ...
User avatar
bud77
Seasoned
Seasoned
 
Posts: 511
Joined: Tue Mar 06, 2012 3:23 pm
Location: France

Re: SynoCommunity is glad to announce its new repo

Postby bud77 » Tue Jan 08, 2013 11:49 am

ATTENTION

There MIGHT be an issue while upgrading package on DSM 4.2beta, so please, do not update yet
User avatar
bud77
Seasoned
Seasoned
 
Posts: 511
Joined: Tue Mar 06, 2012 3:23 pm
Location: France

Re: SynoCommunity is glad to announce its new repo

Postby bud77 » Tue Jan 08, 2013 2:14 pm

Bug has been confirmed : the package center needs the dependencies to be in status "running" to update package

And since Python's status is set to "not running" by default, it will generate huge issues so ... :

DO NOT UPDATE PACKAGES UNDER DSM 4.2 UNTIL FURTHER NOTICE
User avatar
bud77
Seasoned
Seasoned
 
Posts: 511
Joined: Tue Mar 06, 2012 3:23 pm
Location: France

Re: SynoCommunity is glad to announce its new repo

Postby Smiggel » Tue Jan 08, 2013 2:19 pm

Glad my packages were up-to-date before the upgrade to 4.2 ;-) Good thing you post a notice here.

BTW, would it not be a good idea to post a link on the Synocommunity website to this topic?
Smiggel
Apprentice
Apprentice
 
Posts: 85
Joined: Fri May 04, 2012 9:28 pm

Re: SynoCommunity is glad to announce its new repo

Postby bud77 » Tue Jan 08, 2013 2:20 pm

Smiggel wrote:Glad my packages were up-to-date before the upgrade to 4.2 ;-) Good thing you post a notice here.

BTW, would it not be a good idea to post a link on the Synocommunity website to this topic?


You have a point. I also added a twitt about it :)
User avatar
bud77
Seasoned
Seasoned
 
Posts: 511
Joined: Tue Mar 06, 2012 3:23 pm
Location: France

Re: SynoCommunity is glad to announce its new repo

Postby Smiggel » Tue Jan 08, 2013 2:21 pm

bud77 wrote:
Smiggel wrote:Glad my packages were up-to-date before the upgrade to 4.2 ;-) Good thing you post a notice here.

BTW, would it not be a good idea to post a link on the Synocommunity website to this topic?


You have a point. I also added a twitt about it :)


I saw the tweet, but there is no link to this forum. So you always have to search for it. That's why I thought it would perhaps be good to have a link to this thread.
Smiggel
Apprentice
Apprentice
 
Posts: 85
Joined: Fri May 04, 2012 9:28 pm

Re: SynoCommunity is glad to announce its new repo

Postby bud77 » Tue Jan 08, 2013 2:28 pm

@Smiggel : just added the link on twitter, and asked the website admin to link to it
User avatar
bud77
Seasoned
Seasoned
 
Posts: 511
Joined: Tue Mar 06, 2012 3:23 pm
Location: France

Re: SynoCommunity is glad to announce its new repo

Postby Smiggel » Tue Jan 08, 2013 2:29 pm

bud77 wrote:@Smiggel : just added the link on twitter, and asked the website admin to link to it


:-) Saw it already passing by. ;-) Good work.
Smiggel
Apprentice
Apprentice
 
Posts: 85
Joined: Fri May 04, 2012 9:28 pm

Re: SynoCommunity is glad to announce its new repo

Postby rde » Tue Jan 08, 2013 4:50 pm

Could synocommunity be able to provide a package for an usb over ip solution ?
It would be cool to be able to attach any usb pheriperal to the nas and be able to connect to it with some software over any remote computer.
The problem is i don't think alot of this sort of Linux project exist and can ge tported to the syno.
rde
Novice
Novice
 
Posts: 40
Joined: Wed Nov 03, 2010 10:52 am

Re: SynoCommunity is glad to announce its new repo

Postby tripkip » Wed Jan 09, 2013 9:03 am

bud77 wrote:
tripkip wrote:Thanks for the great repo. Hope to see SABnzbd 0.7.9 real soon.


It's been out since 3 days ... please ...


Out from source, but SABnzbd 0.7.9 isn't available on the SynoCommunity repo, is it?

When I go to package center and refresh, there are no updates available and my SABnzbd version is 0.7.7-6.
===========================
Synology DS413 DSM 5.0
SHR with 2 X 2TB + 2 x 3TB WD Red
tripkip
Beginner
Beginner
 
Posts: 25
Joined: Fri Dec 21, 2012 3:07 pm

Re: SynoCommunity is glad to announce its new repo

Postby bud77 » Wed Jan 09, 2013 9:41 am

Yes, source was available 3 days before. So do not expect a package the next day, even more during holiday season

Packages are made out of free time, by people working besides doing packages

Just stop asking when packages will be available, the answer will always be "as soon as it's finished"
User avatar
bud77
Seasoned
Seasoned
 
Posts: 511
Joined: Tue Mar 06, 2012 3:23 pm
Location: France

Re: SynoCommunity is glad to announce its new repo

Postby tripkip » Wed Jan 09, 2013 9:44 am

bud77 wrote:Yes, source was available 3 days before. So do not expect a package the next day, even more during holiday season

Packages are made out of free time, by people working besides doing packages

Just stop asking when packages will be available, the answer will always be "as soon as it's finished"


OK Excuse me. New to Syno. No problem, didn't know it was a manual process to create new packages.

Thanks.
===========================
Synology DS413 DSM 5.0
SHR with 2 X 2TB + 2 x 3TB WD Red
tripkip
Beginner
Beginner
 
Posts: 25
Joined: Fri Dec 21, 2012 3:07 pm

PreviousNext

Return to Third-party Packages

Who is online

Users browsing this forum: No registered users and 9 guests