DS1010+ & Seagate ST1500341AS SMART is broke?!

[the_noisy_crow]

Hi all,

Well, got my new toy (DS1010+).
Also decided to try a Seagate ST15000341AS as it is the CCH1 firmware.

BUT....

The SMART numbers are all fooey?!
For Example:

Power_On_Hours == 0 << understandable it's just been turned on
Load_Cycle_Count == ?? << isn't there?
Raw_Read_Error_Rate == 521,538 << that's odd?
Seek_Error_Rate == 10,487 << huh?
Hardware_ECC_Recovered == 521,538
Head_Flying_Hours == 2,535,319

Help!
What do these numbers actually mean, or are they just broke?
I'm running the latest DSM firmware (1161)

Please Advise.
NC

[the_noisy_crow]

Got up this morning, numbers still climbing so I've returned the drive and gone for a WD 2.0TB WD2001FASS instead.

ST1500341AS numbers this morning...

Power_On_Hours == 11
Raw_Read_Error_Rate == 4,384,265 (growth of 3,862,727)
Seek_Error_Rate == 2,071,575 (growth of 2,061,088)
Hardware_ECC_Recovered == 4,384,265 (same as read error rate)
Head_Flying_Hours == 1,749,898 (decreased by 785,421)

Also, the drive itself was quite hot and was a cause of vibrational noise.

So in short I CANNOT recommend the ST1500341AS in a DS1010+

NC