[Merged Topic] v.1334 Update Problem

[syno007]

Hi,

First of all sorry for my bad english.

I've got a DS710+ synology nas in which DSM 3 beta was. My nas starts automatically this morning without problem as each day.

I've installed final DSM 3 version this morning.

On reboot, the blue led flicks/blinks... and that for 2 hours.

Lan led is flicking/blinking too (less).

What should I do ?


Thanks


DS710+
2x WD 20EARS 2 To
static ip


---
French version :

Bonjour,

J'ai un DS710+ sous DSM 3 beta qui a démarré ce matin à 8h00 sans aucun souci et comme chaque matin.

Vers 9h00, je décide d'installer la version finale de DSM 3.

Celle-ci semble bien se passer.

Cependant, au redémarrage, la led bleue ne fait que clignoter.

Les disques dur n'ont semble-t-il pas redémarré car leur led ne s'allume pas. Seule la led lan clignote par intermittence.


Je ne sais pas quoi faire :
- attendre (ça fait 2h que c'est comme ça)
- éteindre le nas à l'arrache et le redémarrer manuellement
- ...

DS710+
2x WD 20EARS 2To
ip static

---

[syno.allen]

Hi:
Could you force rebooting the DiskStation by long pressing the power button to shutdown and press again to see if it boot correctly ?

If it still not works, please see this FAQto reinstall DSM 3.0 firmware.

[syno007]

Thanks for your post.

It's doesn't boot correctly after a shutdown.

I try to boot without hardisks : no problem in this configuration, nas is booting, so motherboard seems to be ok.


I'm going to see your link.

[Caleb]

Same problem
Synology Assitant say 4 hours "Starting services"
Reinstallation was not helpfull

[LDSign]

And here too - DS710+ stuck at "starting services".

Tried to reinstall 1285...the DS doesnt accept it. So now I am lost...hopefully my data will not be lost.

Support ticket to synology, but no answer yet! Come on synology, this is really bad!

Cheers,
Frank

[melo]

Hi,

I wanted to install the final release of the DS 3.0, but now my 1010+ starts services for hours.
Reboot doesn't change the situation.
Reinstall too.
Does anybody have an idea?

[syno007]

Mmmmh... bad news in this case.

Don't know if I really should try a reinstallation.

Support ticket to syno few hours ago too. No answer yet.

[syno007]

Hi,

It seems I have the same problem on my 710+
I've created a topic, no solution yet.

[LDSign]

Some guys at the german board have this issue, too.

Synology, why does a beta work and with the final we all get into this trouble?! Hopefully you don't let us stand in the rain and bring a solution soon!

Cheers,
Frank

[Pitne]

What is the problem exactly? I have the DS1010+ and havent seen any issues yet. I upgraded from the DSM 3 beta

[ykmang]

I also got the same problem after upgrade.The power & LAN button is blinking for more than 3 hours when it tried to boot... I am using 209j and upgraded from 2.3... Is there anyway I can do?

[melo]

What is the problem exactly? I have the DS1010+ and havent seen any issues yet. I upgraded from the DSM 3 beta

Hi,

I upgrade from the latest stable 2.3 and got a blinking blue light.
I have completely resetted my DS now and install the system at this moment.
If this works I will have to make all my configuration again, because of the stupid backup tool
which doesn't backup the whole configuration.

Yours
M

[ZeusII]

Luckyly, mi DS109+ with the 3.0 Beta updated fine.

Hope everyone can solve the problem promptly

[koenraad]

hi

same on a ds209, an upgrade to DSM3.0 resulted in a flashing blue light and the message " starting services"
i did a reset, reinstalled dsm3.0 but with the same result. so this is a bad thing,
I'm waiting for Synology to give a quick solution,
Regards

[jangermann]

Just updated my diskstation DS209+II to DSM3.0 and now it can NOT boot anymore
In the synology assistant it just write "starting services" but newer starts.

Now what SYNOLOGY?????