I have created an iSCSI lun and connected it to esxi.
I can access this lun just fine from esxi.
Can I still access this lun from inside Diskstation?
iSCSI question
2 posts
• Page 1 of 1
iSCSI question
by sifuhall » Thu Apr 12, 2012 5:13 am
- sifuhall
- I'm New!
- Posts: 9
- Joined: Thu Apr 12, 2012 5:09 am
Re: iSCSI question
by Fit » Sun Apr 15, 2012 9:47 pm
No, you cannot access any files inside the iSCSI LUN from within the DiskStation itself.
DS207+ DSM 3.1-1613 | 2 x WD5000AAKS (500GB) | RAID1
DS207+ DSM 3.1-1613 | 2 x WD5000AAKS (500GB) | RAID1
DS207+ DSM 3.0-1354 | 2 x ST31000528AS (1TB) | RAID1
DS109j DSM 4.0-2198 | HDS725050KLA360 (500GB) | Basic
DS209+II DSM 4.0-2198 | 2 x ST31500341AS (1,5TB) | RAID1
DS209+II DSM 4.0-2198 | ST31500341AS (1,5TB) + WD5000AAKS (500GB) | 2 x basic
DS211j DSM 4.0-2228 | 2 x ST3320820AS (320GB) | RAID1
DS111 DSM 4.2-3211 | WD150ADFS (150GB) | Basic
2 x APC Back-UPS CS 500
DS207+ DSM 3.1-1613 | 2 x WD5000AAKS (500GB) | RAID1
DS207+ DSM 3.0-1354 | 2 x ST31000528AS (1TB) | RAID1
DS109j DSM 4.0-2198 | HDS725050KLA360 (500GB) | Basic
DS209+II DSM 4.0-2198 | 2 x ST31500341AS (1,5TB) | RAID1
DS209+II DSM 4.0-2198 | ST31500341AS (1,5TB) + WD5000AAKS (500GB) | 2 x basic
DS211j DSM 4.0-2228 | 2 x ST3320820AS (320GB) | RAID1
DS111 DSM 4.2-3211 | WD150ADFS (150GB) | Basic
2 x APC Back-UPS CS 500
-
Fit - Versed
- Posts: 256
- Joined: Thu Apr 29, 2010 9:24 pm
- Location: Belgium
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests