DS209+II Memory Upgrade

[EdwardSun]

Per my earlier post;
One thing I noticed was if you get only a blue flashing light, try the reset button. Once I did that and rebooted the unit worked fine, no data loss.

"Your mileage may vary so be sure your data is safe"

FWIW, I ended up getting 2 RAM chips so if anyone needs an twin to the one I used let me know.

Dear garciamag,

I do interesting with your Samsung memory module, could you give me your contact info?

Thanks

[Fit]

To the ones who have implemented the memory upgrade, do you see any significant performance gains? What exactly performs better and if measurable in what amount?

I am thinking of upgrading 1 of my DS209+II devices' memory if it would have a significant performance gain on let's say iSCSI and SMB.

Thanks

[Weex]

Hi,
this DS's have a serial console, so you can track where is problem during boot,
many memory modules is rejected due CL timing, this DS require CL5.

Transcend DDR2 1024MB 667MHZ CL5 (JM667QSU-1G) working OK

ps: offcourse you can edit SPD EEPROM on memory module over I2C

[Fit]

Hi,
this DS's have a serial console, so you can track where is problem during boot,
many memory modules is rejected due CL timing, this DS require CL5.

Transcend DDR2 1024MB 667MHZ CL5 (JM667QSU-1G) working OK

ps: offcourse you can edit SPD EEPROM on memory module over I2C

Hello Weex

Do you see significant performance gains with the memory upped to 1GB?

Thanks in advance!

[Weex]

Hi,
this DS's have a serial console, so you can track where is problem during boot,
many memory modules is rejected due CL timing, this DS require CL5.

Transcend DDR2 1024MB 667MHZ CL5 (JM667QSU-1G) working OK

ps: offcourse you can edit SPD EEPROM on memory module over I2C

Hello Weex

Do you see significant performance gains with the memory upped to 1GB?

Thanks in advance!

it depends on runing packages

[Fit]

Hi,
this DS's have a serial console, so you can track where is problem during boot,
many memory modules is rejected due CL timing, this DS require CL5.

Transcend DDR2 1024MB 667MHZ CL5 (JM667QSU-1G) working OK

ps: offcourse you can edit SPD EEPROM on memory module over I2C

Hello Weex

Do you see significant performance gains with the memory upped to 1GB?

Thanks in advance!

[notzippy]

1G Kingston KY9530-HYC has a CL of 5 works as well

Nz

[grav3n]

I just tried with a Samsung 2GB PC5300(M470T5663Eh3-CE6) , and eventhou it only sees it as a 1gb modul, it working so fare.